Leviton HCM10-1TW DHC 1000-Watt Dimming Wall Switch Receiver

UPC:078477136713

Leviton HCM10-1TW DHC 1000-Watt Scene-Capable Dimming Wall Switch Receiver

Product Description With One-Button Programming through address capturing, 2-Way X10 Communication, LED Locator, and Brightness Display. Single-Pole applications only. Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands. Rated: 120V 60Hz, 1000W Incandescent, 1000VA (750W) Magnetic Low-Voltage Lighting. As with every dimmer, derating for multiple gang installations is required. Packed with Ivory and White snap-on Rocker and Frame Kits. Kits for other colors must be purchased separately.

Equipped with Leviton's exclusive Intellisense™ Technology for the utmost in reliability, even where electrical "noise" exists on the power line. Overview Features

Two-Way status reporting to status-tracking-capable controllers and programmers registers status changes when manually changed locally (Example: DHC Toscana Deluxe Programmer) Manual and remote ON/OFF switching and full range dimming for larger incandescent and magnetic low-voltage lighting loads such as chandeliers and multiple high-hats. Scene Control capability when used with DHC Scene Controller HXC7S-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers for scene control only (Not 2-way communication). Soft ON/Fade OFF feature for smooth increasing and lowering of brightness levels; extended bulb life Preset feature turns lights ON at last selected brightness level; eliminates the need to readjust settings each time dimmer is switched ON Locator LED illuminates when lights are OFF Fit in standard wall boxes and replace regular switches to provide manual and remote ON/OFF switching, full range dimming and Scene Lighting Control Protected memory maintains light levels during minor power fluctuations Features Leviton's Intellisense™ Technology (gated automatic gain control) which adjusts receiver sensitivity to help eliminate signal problems due to line noise Use existing 60Hz 120V AC house wiring to add multi-location switching without resorting to complicated and costly conventional wiring means Double tap to top of rocker switch brings light to full output without affecting preset levels Neutral connection required. True Decora-style operationypush top of rocker to brighten; bottom to dim Programmable in 1% increments to customize any number of lighting scenes (Requires use of separate software module) True Decora styling coordinates with Leviton's Decora line of designer-wiring devices All devices are UL Listed (File #E313173), CSA Certified (File #LR 3413) and NOM Certified (#057) Backed by a Limited Two-Year Warranty

Note: An HCA02-10E DHC System Amplifier Module must be installed in all panels in every DHC installation to ensure adequate signal strength.

Use with Leviton DPSPE-112 Power Extender to extend120V load capacity to 2000W/2000VA for incandescent, magnetic low-voltage and 120V Advance Mark X™, Mark VII™, and OSRAM Sylvania Quicktronic ® Helios™ fluorescent dimming ballasts.

Note: please make sure this is the part you need and other parts in your system are fine since this item has been discontinued and is not returnable.